Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Medium frequency monolithic forging furnace

  • 35-160kw

  • Three-phase 380V

  • 1-20KHZ


   1. Main parameters:

(1) TXZ--35/45/70/90/11/160 medium frequency power supply

(2) Compensation capacitor and forging furnace workbench (3) Induction coil, guide rail and outer cover (4) Pneumatic feeding mechanism 2. Input power: 35KW/45KW/70KW/90KW/110KW/160kw 3. Output oscillation frequency: 1-20KHZ 4. Input voltage: three-phase 380V 50 or 60HZ 5. Load duration: 100% 6. Cooling water requirements: ≥0.2MPa, ≥20L/min 7. Heating capacity (KG/min) (1) Steel to 1100℃: 2.5KG/3.3KG/4.16KG (2) Copper to 900℃: 3.5KG/4.6KG/5.8KG 8. Table size: 1.4 meters long × 0.7 meters wide × 0.89 meters high 9. Forging furnace weight: 140/185KG/ 210KG/223KG 10. Used for continuous heating of steel, copper, aluminum and other rods or pipes.

main application:   The medium frequency monolithic heating furnace is used for continuous heat penetration of regular round bars, square materials or other shaped rough materials of steel, stainless steel, copper, aluminum, etc. above Φ12; it is mainly used for continuous heating of the entire material.

Main features of the medium frequency forging furnace: 1. Used for heating copper bars, iron bars, and aluminum bars; 2. Ultra-small size, movable, covering an area of ​​only 0.6 square meters, and easy to use with any forging and rolling equipment; 3. Installation , debugging and operation are very convenient, and you can learn it as soon as you learn it; 4. Induction heating allows the bar to be heated to the required temperature in a very short time, greatly reducing metal oxidation, saving material and improving forging quality; 5. Medium frequency heating Bars above Φ15 are more permeable, more uniform and faster; 6. 24-hour uninterrupted work; 7. Automatic feeding; 8. Save power, environmental protection, reduce costs and labor expenses; 9. Easy to replace the furnace body to adapt to Different requirements for overall heating or end heating of the bar; 10. Adopt ultra-small medium frequency induction heating power supply, which is completely different from traditional medium frequency power supply;

Picture 2

  Including intermediate frequency power supply, compensation capacitor box and workbench, induction coil, feeding mechanism, etc.Depending on the application requirements, it may also include infrared thermometers, temperature controllers and feeding and coiling devices;

Features of the medium frequency monolithic heating furnace: (1) The frequency range is large, from 1KHZ to 20KHZ. The appropriate frequency can be selected according to the diameter of the specific heating workpiece.(2) When the medium frequency forging furnace is heating the entire material, the length of the induction coil is 500mm – 1 meter long, and multiple materials are being heated at the same time, which further ensures the heat penetration effect; (3) The medium frequency monolithic heating furnace adopts a continuous heating method. The load inside the induction coil is relatively balanced, which overcomes the huge change in the actual heating power of the equipment caused by the huge change in the load of a single bar when the load of a single bar rises from room temperature to 1100°C during the entire heating process. , the actual power of the equipment can be guaranteed to be above 85% of the rated power value, and the equipment can be effectively utilized.(4) When heating non-ferrous metals such as copper and aluminum, through reasonable design of induction coils and capacitors, the actual power of the equipment can also be exerted to more than 85% of the maximum power. When heating copper, it can reach a heating capacity of 3.5KG/KW·hour.(5) Compared with thyristor intermediate frequency power supply, it is not only small in size and easy to maintain, but also can save 15 to 20% of electricity.


ZhenJiang TianXiang Precision Blectric Machinery Co.,Ltd
The company has been committed to the development, production and sales of solid-state medium frequency, high frequency and ultra-high frequency induction heating equipment. There are more than 100 equipment specifications currently, and the products cover medium frequency (1~20KHz), high frequency (30~80KHz), Full series of ultra-high frequency (0.1~1.1MHz), super audio frequency (10~60KHz), and power 3KW~600KW.
The main products include: high-frequency induction heating equipment, ultra-high frequency induction heating equipment, medium-frequency induction heating equipment, high-frequency welding machines, high-frequency quenching machines, smelting furnaces, experimental melting furnaces, copper melting furnaces, quenching machine tools, etc.
contact us
Address: No. 29, Yining Road, Dantu District, Zhenjiang City, Jiangsu Province
Manager Gao: 13615288385

Tel: 0511-85219300 85219301 85219302

Email: ztL@txjm-zj.com
Copyright©2023 Zhenjiang Tianxiang Precision Mechanical and Electrical Co., Ltd.