English 
 |
TXCGSC-06 handheld heating machine technical parameters:
1. Input voltage: single phase 220V, 50or 60hz
2. Input power: 6KW
3. Ultra high frequency: 600KHZ--1.1MHZ
4. Cooling water requirements: 0.2MPA, 5L/min
5. Temporary load rate: 80%
7. Equipment volume (CM): Host: 46*20*44 20KG
8. Extension: 150*130*70, weight: 2.5KG
9. Waterway: one in and three out, or one in and four out
Main applications and features:
1) Welding of ultra-small parts
2) Quenching of ultra-small parts
3) Steel wire fuse
4) Ultra-small screws that are resistant to falling out and heated
Mobile heating machine and split movable welding machine use MOSFET tubes as power devices. The high-frequency transformer is in a small extension unit with low loss. The output frequency of the equipment is as high as 1.1MHZ. It is suitable for heating some small parts, especially in brazing hard alloys. Welding gear industry has a wide range of applications, also known as alloy saw blade welding machine, sawtooth welding machine, gear welding machine, small parts quenching machine, rapid annealing machine.
Performance advantages:
1) Imported core power components and chips, Xinkangda transformer core, Japanese or American potentiometers, Taiwan buttons, high-quality air pipes, etc. to ensure stable equipment quality and equipment life of more than 5 years.
2) Frequent start and stop
3) It has multiple protection circuits such as overcurrent, overvoltage, water shortage, overheating, and inappropriate frequency.
4) It has power, current and frequency display, which is intuitive and easier to design the induction coil.
5) The whole machine operates stably and the failure rate is extremely low
Equipment installation requirements:
1) Input power cord: 6mm2 soft copper wire, 4mm2 soft copper wire;
2) Cooling water requirements: clean water, no impurities, not likely to cause pipe blockage or structure, inlet water temperature 25-36°C';
3) For this model, it is recommended to use an industrial chiller
TXCGSC-06 handheld heating machine technical parameters:
1. Input voltage: single phase 220V, 50or 60hz
2. Input power: 6KW
3. Ultra high frequency: 600KHZ--1.1MHZ
4. Cooling water requirements: 0.2MPA, 5L/min
5. Temporary load rate: 80%
7. Equipment volume (CM): Host: 46*20*44 20KG
8. Extension: 150*130*70, weight: 2.5KG
9. Waterway: one in and three out, or one in and four out
Main applications and features:
1) Welding of ultra-small parts
2) Quenching of ultra-small parts
3) Steel wire fuse
4) Ultra-small screws that are resistant to falling out and heated
Mobile heating machine and split movable welding machine use MOSFET tubes as power devices. The high-frequency transformer is in a small extension unit with low loss. The output frequency of the equipment is as high as 1.1MHZ. It is suitable for heating some small parts, especially in brazing hard alloys. Welding gear industry has a wide range of applications, also known as alloy saw blade welding machine, sawtooth welding machine, gear welding machine, small parts quenching machine, rapid annealing machine.
Performance advantages:
1) Imported core power components and chips, Xinkangda transformer core, Japanese or American potentiometers, Taiwan buttons, high-quality air pipes, etc. to ensure stable equipment quality and equipment life of more than 5 years.
2) Frequent start and stop
3) It has multiple protection circuits such as overcurrent, overvoltage, water shortage, overheating, and inappropriate frequency.
4) It has power, current and frequency display, which is intuitive and easier to design the induction coil.
5) The whole machine operates stably and the failure rate is extremely low
Equipment installation requirements:
1) Input power cord: 6mm2 soft copper wire, 4mm2 soft copper wire;
2) Cooling water requirements: clean water, no impurities, not likely to cause pipe blockage or structure, inlet water temperature 25-36°C';
3) For this model, it is recommended to use an industrial chiller
