Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button


  • 30KW

  • Three-phase 380V

  • 100KHZ


TXSCS-30 handheld heating machine

(1 )   TXSCS-30 technical parameters

(2) Oscillation power: 30KW (3)   Input power 25KW (4) Output frequency: about 100KHZ (5) Input voltage: three-phase 380V 50 or 60HZ (6) Load duration: 50% (7) Heating head cable length: 3--6 meters long (8) Equipment weight: 63KG (9) Heating head weight: 1.8KG (10) Power supply chassis size (CM): 57 length × 32 width × 71 height (11) Heating head size (CM): 18.8 length × 6.8 width × 6 height TXSCS -30 handheld heating machine introduction:

  TXSCS hand-held heating machine is also known as 3-6 meter heating welding machine, portable electric induction heating machine, hand-held high-frequency welding machine, mobile induction brazing machine, hand-held brazing machine, hand-held induction welding machine, mobile welding machine and high-frequency welding machine. Frequency welding machine, the equipment power is 6~60KW, the frequency is 30-200KHZ, and the heating head lead is 3~6 meters long. It can be used for various on-site heating applications such as transformer joint welding, copper tube online welding, surface heating coating, etc., solving Problems with on-site welding using induction heating equipment.

TXSCS-30 handheld heating machine has the following advantages:

The cable lead is 3-6 meters long, which is convenient and fast; the machine head cable is light in weight and small in size, weighing less than 1 kg. It comes with a handle and hook, which can be held in hand and can be hung. The machine head has good heat dissipation and no leakage or overheating. High heating efficiency and loss. Extremely low and can be used with automatic mechanisms to achieve automated welding; Compared with many flame heating or welding methods, it is safe and environmentally friendly, can effectively improve the working environment, and adapts to the requirements of modern factories; Easy to learn and operate, you can start working in a few hours of training, and can Save labor costs for professional welding technicians.Widely used in online welding of copper pipes for air conditioners, refrigerators, compressors, and transformers.  Local heating in automobile and other industries.

 Main specifications and parameters of TXCGSC series:

Main specifications

input power

Heating head cable length

Output frequency

Input voltage




2-8 meters


220V single phase

All equipment has type A, which is the self-control type, with heating and holding time and power adjustment functions;



380V three-phase

50 or 60HZ







Main applications: The handheld heating machine series is suitable for heating purposes in on-site operations, such as:

(1) Brazing of power transformer joints

(2) Air conditioning, refrigerator copper tubes, capillary tubes, copper tubes and rotor stator parts are brazed, the welding time is 3-6 seconds

(3) Mold heating and surface hot coating

(4) Preheating of welds or other parts, etc.

Working principle and structural features:

TXCGSC handheld heating machine series equipment all adopt parallel resonant circuits. After resonance, high-frequency power is output to the heating head through a high-frequency transformer, and then the high-frequency power suitable for heating is output to the induction coil;

Due to the adoption of parallel resonance technology, there is only a resonant capacitor inside the heating head. The structure is small and light, and the heating cable and heating head are not easily damaged. Moreover, the capacitor and induction coil in the heating head directly resonate to produce a large induction coil current, which greatly improves the heating efficiency of the equipment. Improved, equipment useless energy consumption is greatly reduced.The equipment adopts the IBGT module and our company's third-generation converter technology, that is, full soft-switching dual-regulation converter control technology. In this technology, power and frequency are independently controlled, using IGBT power devices and soft-switching technology and amorphous The inductor forms a high-frequency chopper circuit to adjust the power, and IGBT parallel resonance and automatic frequency tracking technology are used to obtain a high-speed and more accurate soft-switching control inversion process.

ZhenJiang TianXiang Precision Blectric Machinery Co.,Ltd
The company has been committed to the development, production and sales of solid-state medium frequency, high frequency and ultra-high frequency induction heating equipment. There are more than 100 equipment specifications currently, and the products cover medium frequency (1~20KHz), high frequency (30~80KHz), Full series of ultra-high frequency (0.1~1.1MHz), super audio frequency (10~60KHz), and power 3KW~600KW.
The main products include: high-frequency induction heating equipment, ultra-high frequency induction heating equipment, medium-frequency induction heating equipment, high-frequency welding machines, high-frequency quenching machines, smelting furnaces, experimental melting furnaces, copper melting furnaces, quenching machine tools, etc.
contact us
Address: No. 29, Yining Road, Dantu District, Zhenjiang City, Jiangsu Province
Manager Gao: 13615288385

Tel: 0511-85219300 85219301 85219302

Email: ztL@txjm-zj.com
Copyright©2023 Zhenjiang Tianxiang Precision Mechanical and Electrical Co., Ltd.