English 
 |
The main technical parameters:
1. Input power: 4KW
2. Oscillation frequency: 100-250KHZ
3. Input voltage: single-phase 220V, 50 or 60HZ
4. Cooling water requirements: 0.2Mpa, 2 L/min
5. Load duration: 80%
6. Automatically controlled timing function: heating time, holding time, cooling time: 0.1-9.9 seconds
7. Weight: 18KG
8. Volume: length 46 × width 20 × height 44
main feature:
1. Using MOSFET power devices and our company’s unique converter control technology;
2. The oscillation frequency can reach 250KHZ, which is especially suitable for rapid heating of small metal items;
3. The equipment is simple and lightweight;,
4. The operation is simple and can be learned in a few minutes;
5. Easy to install, just need to connect electricity and water to use, no need for special personnel to install;
6. The automatic control type can adjust the power and time of the heating and heat preservation processes, which is beneficial to improving the heating quality.
Repeatability of quantities simplifies worker operations;
Advantages over resistance welding teeth:
1. Efficient and fast tooth welding, 1-5 seconds per tooth;
2. Good repeatability, each tooth has good repeatability;
3. Heating is fast and even, which can effectively prevent embrittlement and fracture caused by local overheating of the saw teeth, and can also prevent tooth loss and other undesirable phenomena caused by incomplete welding;
4. It can weld saw blades with high performance and high hardness, which cannot be welded by resistance welding.
The main technical parameters:
1. Input power: 4KW
2. Oscillation frequency: 100-250KHZ
3. Input voltage: single-phase 220V, 50 or 60HZ
4. Cooling water requirements: 0.2Mpa, 2 L/min
5. Load duration: 80%
6. Automatically controlled timing function: heating time, holding time, cooling time: 0.1-9.9 seconds
7. Weight: 18KG
8. Volume: length 46 × width 20 × height 44
main feature:
1. Using MOSFET power devices and our company’s unique converter control technology;
2. The oscillation frequency can reach 250KHZ, which is especially suitable for rapid heating of small metal items;
3. The equipment is simple and lightweight;,
4. The operation is simple and can be learned in a few minutes;
5. Easy to install, just need to connect electricity and water to use, no need for special personnel to install;
6. The automatic control type can adjust the power and time of the heating and heat preservation processes, which is beneficial to improving the heating quality.
Repeatability of quantities simplifies worker operations;
Advantages over resistance welding teeth:
1. Efficient and fast tooth welding, 1-5 seconds per tooth;
2. Good repeatability, each tooth has good repeatability;
3. Heating is fast and even, which can effectively prevent embrittlement and fracture caused by local overheating of the saw teeth, and can also prevent tooth loss and other undesirable phenomena caused by incomplete welding;
4. It can weld saw blades with high performance and high hardness, which cannot be welded by resistance welding.
